Aluminum Steel Plate
-
Introduction
- Product Type:Aluminum steel Sheet / Plate
Thickness: 0.20mm - 500mm
Width: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm,3800mm etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcLength:1000mm - 12000mm
Temper: O,H14,H24,H32,H112 Etc;T4,T651 Etc
Material :
1000 Series: 1050, 1060, 1070, 1100, 1200, 1235, etc.
2000 Series: 2014, 2024, etc.
3000 Series: 3003, 3004, 3005, 3104, 3105, 3A21, etc.
4000 Series: 4045, 4047, 4343, etc.
5000 Series: 5005, 5052, 5083, 5086, 5154, 5182, 5251, 5454, 5754, 5A06, etc.f
6000 Series: 6061, 6063, 6082, 6A02, etc.Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.
Specification
-
Specifications
1000 Series Industrial Pure Aluminum(1A99, 1A97, 1050, 1050A, 1A50, 1060, 1070, 1350, 1145, 1035, 1100, 1200, 1235, 1A30) 2000 Series Aluminum-copper Alloys(2A01, 2A02, 2A04, 2A06, 2A11, 2A12, 2A14, 2A16, 2A17, 2A21, 2A25, 2A70, 2A80, 2A90, 2204, 2014, 2214, 2017, 2219, 2024, 2124) 3000 Series Aluminum-manganese Alloys(3A21, 3003, 3103, 3004, 3005, 3105) 4000 Series Al-Si Alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A) 5000 Series Al-Mg Alloys(5A01, 5A03, 5A05, 5A06, 5B05, 5B06, 5A12, 5A13, 5A30, 5A66, 5005, 5019, 5050, 5251, 5052, 5154, 5454, 5754, 5056, 5456, 5082, 5083, 5182, 5183, In 5086) 6000 Series Aluminum Magnesium Silicon Alloys(6A12, 6B12, 6A51, 6101, 6005, 6060, 6061, 6063, 6063A, 6181, 6082) 7000 Series Aluminum, Zinc, Magnesium and Copper Alloys(7003, 7005, 7020, 7022, 7050, 7075, 7475, 7A01, 7A03, 7A04, 7A05, 7A09, 7A10, 7A15, 7A52) 8000 Series Other Alloys(8A06, 8011, 8090) Aluminum Grade
Product name Aluminum Sheet:0.15-6.0 Aluminum Plate:6.0-25.0 Width(mm) 20-2000mm or customized according to requirements Thickness 0.35mm-100mm or customized according to requirements Length According to the need to customize Standard GB, JIS, DIN, ASTM,ANSI Surface treatment Bright, polished, hairline, brush, sandblasting, grid, relief, etching, rolling surface finish, no stains, no rough edges, patterns, printing,brushed, mirror, embossed, sandblasted, etc Temper O, H12, H14, H16, H18, H112, H113, H19, H111, H22, H24, H26, H211, H32, H36, H38, H131, H151, H241, H261, H341, H361, F, T53, T6, T63, T6351, T651, T73, T7351, etc. Type Plate, sheet,strips,belt, thin plate, medium plate, thick plate, super thick plate, coil Properties Corrosion resistance, heat resistance, high hardness, good ductility Production process Hot rolling or cold rolling Product application Industry, transportation, building modeling, automobile, medical machinery, etc Package Standard export package, such as wooden box or as required. Mechanical properties
Aluminum Alloy Alloy State Thickness(mm) Tensile strength (Rm/Mpa) Yield strength (Rp0.2/Mpa) Elongation (%) Bending radius(α) Hardness( HBW)α A50mm A5.65 90° 180° ≥ 5754 F ≥2.5~100 — — — — — — — >100.0~150.0 180 — — — — — — O
H111>0.2~0.5 190~240 80 12 — 0t 0.5t 38 >0.5~1.5 190~240 80 14 — 0.5t 0.5t 38 >1.5~3.0 190~240 80 16 — 1.0t 1.0t 38 >3.0~6.0 190~240 80 18 — 1.0t 1.0t 38 >6.0~12.5 190~240 80 18 — 2.0t — 38 >12.5~100.0 190~240 80 — 17 — — 38 H112 >6.0~12.5 190 100 12 — — — 62 >12.5~25.0 190 90 — 10 — — 58 >25.0~40.0 190 80 — 12 — — 52 >40.0~80.0 190 80 — 14 — — 52 H12 >0.2~0.5 220~270 170 4 — — — 46 >0.5~1.5 220~270 170 5 — — — 46 >1.5~3.0 220~270 170 6 — — — 46 >3.0~6.0 220~270 170 7 — — — 46 H14 >0.2~0.5 240~280 190 3 — — — 54 >0.5~1.5 240~280 190 3 — — — 60 >1.5~3.0 240~280 190 4 — — — 60 >3.0~6.0 240~280 190 4 — — — 60 Physical and chemical properties of product grade
1000 Series Aluminum Plate
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Others:
Others:
Al: Min.
Each
Total
1050
0.25
0.4
0.05
0.05
0.05
–
0.05
0.03
0.03
–
99.5
1050A
0.25
0.4
0.05
0.05
0.05
–
0.07
0.05
0.03
–
99.5
1060
0.25
0.35
0.05
0.03
0.03
–
0.05
0.03
0.03
–
99.6
1070
0.2
0.25
0.04
0.03
0.03
–
0.04
0.03
0.03
–
99.7
1100
0.95 Si
+ Fe
0.05~0.20
0.05
–
–
0.1
–
0.05
0.15
99
2000 Series Aluminum Plate
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Al:Min.
2A06
0.5
0.5
3.8-4.3
0.5-1.0
1.7-2.3
–
0.1
0.03-0.15
the rest part
2A16
0.3
0.3
6.0-7.0
0.4-0.8
0.05
–
0.1
0.1-0.2
the rest part
3000 Series Aluminum Plate
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Al: Min.
3003
0.6
0.7
0.05~0.20
1.0~ 1.5
—
—
0.1
—
the rest part
3004
0.3
0.7
0.25
1.0~ 1.5
0.8–1.3
—
0.25
—
the rest part
3A21
0.6
0.7
0.05~0.20
1.0~ 1.5
—
—
0.1
—
the rest part
5000 Series Aluminum Plate
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Other
Al: Min.
5052
≤0.25
≤0.40
≤0.10
≤0.10
2.2-2.8
0.15-0.35
≤ 0.1
/
≤ 0.05
the rest part
5005
≤ 0.3
≤ 0.7
≤ 0.2
≤ 0.2
0.5 - 1.1
≤ 0.1
0.25
/
≤ 0.05
the rest part
5083
≤ 0.4
≤0.40
≤0.10
0.4-1.0
4.0-4.9
0.05-0.25
≤ 0.25
/
≤ 0.05
the rest part
5A05
≤ 0.5
≤0.50
≤0.10
0.3-0.6
4.8-5.5
/
≤ 0.20
/
≤ 0.05
the rest part
6000 Series Aluminum Plate
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Other
Al: Min.
6061
0.4-0.8
≤0.7
0.15-0.4
≤0.15
0.8-1.2
0.04-0.35
≤0.25
≤0.15
≤0.05
The rest part
7000 Series Aluminum Plate
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Other
Al: Min.
7075
≤0.4
≤0.5
1.2-2.0
≤0.30
2.1-2.9
0.18-0.28
5.1-6.1
≤0.2
≤0.05
the rest part
8000 Series Aluminum Plate
Alloy
Si
Fe
Cu
Mn
Mg
Cr
Zn
Ti
Other
Al: Min.
8011
0.5-0.9
0.6-1
≤0.1
≤0.2
≤0.05
≤0.05
≤0.10
≤0.08
≤0.05
The rest part
Mechanical properties
Aluminum Alloy Alloy State Thickness(mm) Tensile strength (Rm/Mpa) Yield strength (Rp0.2/Mpa) Elongation (%) 5A05 O、H112 0.15-500 ≥225 ≥110 ≥1
